June 2003 

So, stuff you will need to get for your 100E restoration. These are sometime very hard to get hold of, as they are 50 years old! - I will list the specialist stuff separately - its worth noting this web site though - http://www.smallfordspares.com 

Get as many books on the car as you can. I must have about a dozen books now, and each of them tell me something new about Daisy!!
If you plan to respray your car, its worth noting the the badges will probably die when you try and remove them (they are 50years old after all!), get original badges if you can, they don't cost much second hand.
DISTRIBUTOR CAP

Lucas Warehouse

Part Number : DDB111
A Hammer Drill with variable speed
I have listed this book separately, as it is rare as hell!! - I have the workshop manual (very good book) But this is the gem. All about the 100E in the friendly Haynes format. Get it if you can, but VERY rare and expensive too!
Some to store all the 'bits' for the project in hand. I am working on the suspension and the installation of the temp gauge, so, they all live in the boot at the moment.
Get a shed load of Jubilee clips (hose clips) Halfords are as good as any, you will use a lot of these!
Machine Mart, a good source for all the spanners and screwdrivers you will ever need.
OIL FILTER - PAPER CARTRIDGE TYPE

Lucas Warehouse

Make : Crosland Filters

Part Number : 418
You will need

AXEL STANDS x2

RAMPS x2

TROLLEY JACK x1

Oil catcher (bucket or basin!)

All can be bought from Machine mart (www.machinemart.co.uk)

 
Socket set with rachet

Machine Mart / Halfords
SPARK PLUGS

Lucas Warehouse

MAKE : NGK

Part Number : 4511 - BP6HS
Tap and Die set - Machine Mart

Various Drill bits - B&Q
TEMP GAUGE

Lucas Warehouse

MAKE : DURITC - Mechanical Temp Gauge (NOT electric!)

Part Number : 0-533-23
A collection of various tools
WD40 - Buy it by the gallon!! - You will use lots !!
   
   
   
   

  << Back